nanoscopic wiki

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
====== Ubiquiti ======
  * https://community.ui.com/questions/UAP-Pro-flashing-white-blue-will-not-stop-cannot-be-located-is-it-dead/835215c4-e033-4c6e-82f6-8b6c4c88bb7a
  * {{ :pages:howtos:ubiquiti:kurzanleitung-uc-ck.pdf |}}
  * {{ :pages:howtos:ubiquiti:unifi_ap_ap-lr_user_guide.pdf |}}
  * {{ :pages:howtos:ubiquiti:unifi_ap-pro_ug.pdf |}}
  * {{ :pages:howtos:ubiquiti:unifi_ap-ac-pro_qsg.pdf |}}
  * https://ui.com/download/releases/firmware
  * https://help.ui.com/hc/en-us/articles/360043360253-UniFi-Recovery-Mode
  * https://www.davidmello.com/unifi-cloud-key-fix/
  * https://unifi.ui.com/network-servers
===== Cloud Key (Gen1) Recovery Mode =====

  * Download the most recent firmware for your device, found [[https://dl.ubnt.com/unifi/cloudkey/firmware/UCK/UCK.mtk7623.v1.1.19.f4a17b0.210204.0232.bin | here]].
  * Power off the system.
  * Press and hold the Reset button and then connect it to the power source.
  * Continue holding the Reset button for 10 seconds, until the LED flashes blue and white.
  * Open your browser and type the IP address for the Cloud Key.
    * Note: The IP address comes from your DHCP server. If it has not been assigned an IP address, you can try the fallback: 192.168.1.30.
    * If your Cloud Key does have an IP address assigned by the DHCP server, the fallback IP will not work.
    * User Tip: If you don't know your Cloud Key's IP address, you can use thearp -a SSH command, or software such as nmap to find the IP address.
  * You will be taken to the Recovery Mode screen. From here you can reset, reboot, power off and most importantly upload an updated firmware bin file.
  * Upload the firmware you downloaded in step (1).
  * Once it is uploaded, reboot the Cloud Key to complete the firmware upgrade.
  * The LED will flash white while upgrading and turn into a steady white when it is complete.

===== AP Reset =====
The reset button serves two functions:
  * Restart It will restart the device when you press and release it quickly.
  * Restore Factory Defaults When you press and hold it for more then five seconds, it will restore the device to the factory default settings.

----
~~DISCUSSION~~